Instructions – Setup & Safety Guide

Push Me Home clamp positioned on a bicycle seat post — Push Me Home® clamp positioning onto bike seat

Step 1

Remove the seat post from the bike by releasing the clamp or seat-post frame bolt. Place the Push Me Home® clamp onto the seat post in the desired position. If the seat post is too small, use the supplied adapter. Using the supplied Allen key, tighten the cap-head bolt until the clamp firmly grips the seat post.

Push Me Home clamp attached to the bicycle seat post before the seat is returned to the bike — Push Me Home® clamp attached to the bike seat before repositioning it on the bike

Step 2

Place the seat post back onto the bike and tighten the clamp or bolt with the seat positioned at the desired height for the child.

Push Me Home pull ring and clamp used to attach the handle — Installing the Push Me Home® handle into the clamp with the pull ring

Step 3

Pull the ring out and insert the handle. Release the ring and make sure the ring pin slides securely through the hole in the handle attachment.

Push Me Home handle fully extended — Fully extended Push Me Home® handle

Step 4

To extend the handle, pull each section out and twist until the indent pins lock into place.

Demonstration of the extendable Push Me Home handle — The Push Me Home® handle is extendable for easy storage and use

Step 5

To fold the handle, push the indent pins into the tube and push one tube into the other.

Push Me Home bicycle handle attached to a bike and held by an adult — Example of the Push Me Home® bicycle handle attached to a bike and held by the user

Step 6

You and your child are all set to go!